3.2.1 Completion

Completion is a feature present in many shells. It allows the user to type only a part (usually the prefix) of a word and have the shell fill in the rest. The completion system in zsh is programmable. For example, the shell can be set to complete email addresses in arguments to the mail command from your ~/.abook/addressbook; usernames, hostnames, and even remote paths in arguments to scp, and so on. Anything that can be written in or glued together with zsh can be the source of what the line editor offers as possible completions.

Zsh has two completion systems, an old, so called compctl completion (named after the builtin command that serves as its complete and only user interface), and a new one, referred to as compsys, organized as library of builtin and user-defined functions. The two systems differ in their interface for specifying the completion behavior. The new system is more customizable and is supplied with completions for many commonly used commands; it is therefore to be preferred.

The completion system must be enabled explicitly when the shell starts. For more information see Completion System.

3.2.2 Extending the line editor

Apart from completion, the line editor is highly extensible by means of shell functions. Some useful functions are provided with the shell; they provide facilities such as:

insert-composed-char

composing characters not found on the keyboard

match-words-by-style

configuring what the line editor considers a word when moving or deleting by word

history-beginning-search-backward-end, etc.

alternative ways of searching the shell history

replace-string, replace-pattern

functions for replacing strings or patterns globally in the command line

edit-command-line

edit the command line with an external editor.

See ZLE Functions for descriptions of these.

6.8.1 Alias difficulties

Although aliases can be used in ways that bend normal shell syntax, not every string of non-white-space characters can be used as an alias.

Any set of characters not listed as a word above is not a word, hence no attempt is made to expand it as an alias, no matter how it is defined (i.e. via the builtin or the special parameter aliases described in The zsh/parameter Module). However, as noted in the case of POSIX_ALIASES above, the shell does not attempt to deduce whether the string corresponds to a word at the time the alias is created.

For example, an expression containing an = at the start of a command line is an assignment and cannot be expanded as an alias; a lone = is not an assignment but can only be set as an alias using the parameter, as otherwise the = is taken part of the syntax of the builtin command.

It is not presently possible to alias the ‘((’ token that introduces arithmetic expressions, because until a full statement has been parsed, it cannot be distinguished from two consecutive ‘(’ tokens introducing nested subshells. Also, if a separator such as && is aliased, \&& turns into the two tokens \& and &, each of which may have been aliased separately. Similarly for \<<, \>|, etc.

There is a commonly encountered problem with aliases illustrated by the following code:

alias echobar='echo bar'; echobar

This prints a message that the command echobar could not be found. This happens because aliases are expanded when the code is read in; the entire line is read in one go, so that when echobar is executed it is too late to expand the newly defined alias. This is often a problem in shell scripts, functions, and code executed with ‘source’ or ‘.’. Consequently, use of functions rather than aliases is recommended in non-interactive code.

Note also the unhelpful interaction of aliases and function definitions:

alias func='noglob func'
func() {
    echo Do something with $*
}

Because aliases are expanded in function definitions, this causes the following command to be executed:

noglob func() {
    echo Do something with $*
}

which defines noglob as well as func as functions with the body given. To avoid this, either quote the name func or use the alternative function definition form ‘function func’. Ensuring the alias is defined after the function works but is problematic if the code fragment might be re-executed.

9.3.1 Hook Functions

For the functions below, it is possible to define an array that has the same name as the function with ‘_functions’ appended. Any element in such an array is taken as the name of a function to execute; it is executed in the same context and with the same arguments as the basic function. For example, if $chpwd_functions is an array containing the values ‘mychpwd’, ‘chpwd_save_dirstack’, then the shell attempts to execute the functions ‘chpwd’, ‘mychpwd’ and ‘chpwd_save_dirstack’, in that order. Any function that does not exist is silently ignored. A function found by this mechanism is referred to elsewhere as a ‘hook function’. An error in any function causes subsequent functions not to be run. Note further that an error in a precmd hook causes an immediately following periodic function not to run (though it may run at the next opportunity).

chpwd

Executed whenever the current working directory is changed.

periodic ¶

If the parameter PERIOD is set, this function is executed every $PERIOD seconds, just before a prompt. Note that if multiple functions are defined using the array periodic_functions only one period is applied to the complete set of functions, and the scheduled time is not reset if the list of functions is altered. Hence the set of functions is always called together.

precmd

Executed before each prompt. Note that precommand functions are not re-executed simply because the command line is redrawn, as happens, for example, when a notification about an exiting job is displayed.

preexec

Executed just after a command has been read and is about to be executed. If the history mechanism is active (regardless of whether the line was discarded from the history buffer), the string that the user typed is passed as the first argument, otherwise it is an empty string. The actual command that will be executed (including expanded aliases) is passed in two different forms: the second argument is a single-line, size-limited version of the command (with things like function bodies elided); the third argument contains the full text that is being executed.

zshaddhistory ¶

Executed when a history line has been read interactively, but before it is executed. The sole argument is the complete history line (so that any terminating newline will still be present).

If any of the hook functions returns status 1 (or any non-zero value other than 2, though this is not guaranteed for future versions of the shell) the history line will not be saved, although it lingers in the history until the next line is executed, allowing you to reuse or edit it immediately.

If any of the hook functions returns status 2 the history line will be saved on the internal history list, but not written to the history file. In case of a conflict, the first non-zero status value is taken.

A hook function may call ‘fc -p ...’ to switch the history context so that the history is saved in a different file from the that in the global HISTFILE parameter. This is handled specially: the history context is automatically restored after the processing of the history line is finished.

The following example function works with one of the options INC_APPEND_HISTORY or SHARE_HISTORY set, in order that the line is written out immediately after the history entry is added. It first adds the history line to the normal history with the newline stripped, which is usually the correct behaviour. Then it switches the history context so that the line will be written to a history file in the current directory.

zshaddhistory() {
  print -sr -- ${1%%$'\n'}
  fc -p .zsh_local_history
}

zshexit

Executed at the point where the main shell is about to exit normally. This is not called by exiting subshells, nor when the exec precommand modifier is used before an external command. Also, unlike TRAPEXIT, it is not called when functions exit.

9.3.2 Trap Functions

The functions below are treated specially but do not have corresponding hook arrays.

TRAPNAL ¶

If defined and non-null, this function will be executed whenever the shell catches a signal SIGNAL, where NAL is a signal name as specified for the kill builtin. The signal number will be passed as the first parameter to the function.

If a function of this form is defined and null, the shell and processes spawned by it will ignore SIGNAL.

The return status from the function is handled specially. If it is zero, the signal is assumed to have been handled, and execution continues normally. Otherwise, the shell will behave as interrupted except that the return status of the trap is retained.

Programs terminated by uncaught signals typically return the status 128 plus the signal number. Hence the following causes the handler for SIGINT to print a message, then mimic the usual effect of the signal.

TRAPINT() {
  print "Caught SIGINT, aborting."
  return $(( 128 + $1 ))
}

The functions TRAPZERR, TRAPDEBUG and TRAPEXIT are never executed inside other traps.

TRAPDEBUG

If the option DEBUG_BEFORE_CMD is set (as it is by default), executed before each command; otherwise executed after each command. See the description of the trap builtin in Shell Builtin Commands for details of additional features provided in debug traps.

TRAPEXIT

Executed when the shell exits, or when the current function exits if defined inside a function. The value of $? at the start of execution is the exit status of the shell or the return status of the function exiting.

TRAPZERR

Executed whenever a command has a non-zero exit status. However, the function is not executed if the command occurred in a sublist followed by ‘&&’ or ‘||’; only the final command in a sublist of this type causes the trap to be executed. The function TRAPERR acts the same as TRAPZERR on systems where there is no SIGERR (this is the usual case).

The functions beginning ‘TRAP’ may alternatively be defined with the trap builtin: this may be preferable for some uses. Setting a trap with one form removes any trap of the other form for the same signal; removing a trap in either form removes all traps for the same signal. The forms

TRAPNAL() { 
 # code
}

(’function traps’) and

trap '
 # code
' NAL

(’list traps’) are equivalent in most ways, the exceptions being the following:

• Function traps have all the properties of normal functions, appearing in the list of functions and being called with their own function context rather than the context where the trap was triggered.
• The return status from function traps is special, whereas a return from a list trap causes the surrounding context to return with the given status.
• Function traps are not reset within subshells, in accordance with zsh behaviour; list traps are reset, in accordance with POSIX behaviour.

13.2.1 Special characters

%%

A ‘%’.

%)

A ‘)’.

13.2.2 Login information

%l

The line (tty) the user is logged in on, without ‘/dev/’ prefix. If the name starts with ‘/dev/tty’, that prefix is stripped.

%M

The full machine hostname.

%m

The hostname up to the first ‘.’. An integer may follow the ‘%’ to specify how many components of the hostname are desired. With a negative integer, trailing components of the hostname are shown.

%n

$USERNAME.

%y

The line (tty) the user is logged in on, without ‘/dev/’ prefix. This does not treat ‘/dev/tty’ names specially.

13.2.3 Shell state

%#

A ‘#’ if the shell is running with privileges, a ‘%’ if not. Equivalent to ‘%(!.#.%%)’. The definition of ‘privileged’, for these purposes, is that either the effective user ID is zero, or, if POSIX.1e capabilities are supported, that at least one capability is raised in either the Effective or Inheritable capability vectors.

%?

The return status of the last command executed just before the prompt.

%_

The status of the parser, i.e. the shell constructs (like ‘if’ and ‘for’) that have been started on the command line. If given an integer number that many strings will be printed; zero or negative or no integer means print as many as there are. This is most useful in prompts PS2 for continuation lines and PS4 for debugging with the XTRACE option; in the latter case it will also work non-interactively.

%^

The status of the parser in reverse. This is the same as ‘%_’ other than the order of strings. It is often used in RPS2.

%d

%/

Current working directory. If an integer follows the ‘%’, it specifies a number of trailing components of the current working directory to show; zero means the whole path. A negative integer specifies leading components, i.e. %-1d specifies the first component.

%~

As %d and %/, but if the current working directory starts with $HOME, that part is replaced by a ‘~’. Furthermore, if it has a named directory as its prefix, that part is replaced by a ‘~’ followed by the name of the directory, but only if the result is shorter than the full path; Filename Expansion.

%e

Evaluation depth of the current sourced file, shell function, or eval. This is incremented or decremented every time the value of %N is set or reverted to a previous value, respectively. This is most useful for debugging as part of $PS4.

%h

%!

Current history event number.

%i

The line number currently being executed in the script, sourced file, or shell function given by %N. This is most useful for debugging as part of $PS4.

%I

The line number currently being executed in the file %x. This is similar to %i, but the line number is always a line number in the file where the code was defined, even if the code is a shell function.

%j

The number of jobs.

%L

The current value of $SHLVL.

%N

The name of the script, sourced file, or shell function that zsh is currently executing, whichever was started most recently. If there is none, this is equivalent to the parameter $0. An integer may follow the ‘%’ to specify a number of trailing path components to show; zero means the full path. A negative integer specifies leading components.

%x

The name of the file containing the source code currently being executed. This behaves as %N except that function and eval command names are not shown, instead the file where they were defined.

%c

%.

%C

Trailing component of the current working directory. An integer may follow the ‘%’ to get more than one component. Unless ‘%C’ is used, tilde contraction is performed first. These are deprecated as %c and %C are equivalent to %1~ and %1/, respectively, while explicit positive integers have the same effect as for the latter two sequences.

13.2.4 Date and time

%D

The date in yy-mm-dd format.

%T

Current time of day, in 24-hour format.

%t

%@

Current time of day, in 12-hour, am/pm format.

%*

Current time of day in 24-hour format, with seconds.

%w

The date in day-dd format.

%W

The date in mm/dd/yy format.

%D{string}

string is formatted using the strftime function. See man page strftime(3) for more details. Various zsh extensions provide numbers with no leading zero or space if the number is a single digit:

%f

a day of the month

%K

the hour of the day on the 24-hour clock

%L

the hour of the day on the 12-hour clock

In addition, if the system supports the POSIX gettimeofday system call, %. provides decimal fractions of a second since the epoch with leading zeroes. By default three decimal places are provided, but a number of digits up to 9 may be given following the %; hence %6. outputs microseconds, and %9. outputs nanoseconds. (The latter requires a nanosecond-precision clock_gettime; systems lacking this will return a value multiplied by the appropriate power of 10.) A typical example of this is the format ‘%D{%H:%M:%S.%.}’.

The GNU extension %N is handled as a synonym for %9..

Additionally, the GNU extension that a ‘-’ between the % and the format character causes a leading zero or space to be stripped is handled directly by the shell for the format characters d, f, H, k, l, m, M, S and y; any other format characters are provided to the system’s strftime(3) with any leading ‘-’ present, so the handling is system dependent. Further GNU (or other) extensions are also passed to strftime(3) and may work if the system supports them.

13.2.5 Visual effects

%B (%b)

Start (stop) boldface mode.

%E

Clear to end of line.

%U (%u)

Start (stop) underline mode.

%S (%s)

Start (stop) standout mode.

%F (%f)

Start (stop) using a different foreground colour, if supported by the terminal. The colour may be specified two ways: either as a numeric argument, as normal, or by a sequence in braces following the %F, for example %F{red}. In the latter case the values allowed are as described for the fg zle_highlight attribute; Character Highlighting. This means that numeric colours are allowed in the second format also.

%K (%k)

Start (stop) using a different bacKground colour. The syntax is identical to that for %F and %f.

%{...%}

Include a string as a literal escape sequence. The string within the braces should not change the cursor position. Brace pairs can nest.

A positive numeric argument between the % and the { is treated as described for %G below.

%G

Within a %{...%} sequence, include a ‘glitch’: that is, assume that a single character width will be output. This is useful when outputting characters that otherwise cannot be correctly handled by the shell, such as the alternate character set on some terminals. The characters in question can be included within a %{...%} sequence together with the appropriate number of %G sequences to indicate the correct width. An integer between the ‘%’ and ‘G’ indicates a character width other than one. Hence %{seq%2G%} outputs seq and assumes it takes up the width of two standard characters.

Multiple uses of %G accumulate in the obvious fashion; the position of the %G is unimportant. Negative integers are not handled.

Note that when prompt truncation is in use it is advisable to divide up output into single characters within each %{...%} group so that the correct truncation point can be found.

14.1.1 Overview

A history expansion begins with the first character of the histchars parameter, which is ‘!’ by default, and may occur anywhere on the command line, including inside double quotes (but not inside single quotes '...' or C-style quotes $'...' nor when escaped with a backslash).

The first character is followed by an optional event designator (Event Designators) and then an optional word designator (Word Designators); if neither of these designators is present, no history expansion occurs.

Input lines containing history expansions are echoed after being expanded, but before any other expansions take place and before the command is executed. It is this expanded form that is recorded as the history event for later references.

History expansions do not nest.

By default, a history reference with no event designator refers to the same event as any preceding history reference on that command line; if it is the only history reference in a command, it refers to the previous command. However, if the option CSH_JUNKIE_HISTORY is set, then every history reference with no event specification always refers to the previous command.

For example, ‘!’ is the event designator for the previous command, so ‘!!:1’ always refers to the first word of the previous command, and ‘!!$’ always refers to the last word of the previous command. With CSH_JUNKIE_HISTORY set, then ‘!:1’ and ‘!$’ function in the same manner as ‘!!:1’ and ‘!!$’, respectively. Conversely, if CSH_JUNKIE_HISTORY is unset, then ‘!:1’ and ‘!$’ refer to the first and last words, respectively, of the same event referenced by the nearest other history reference preceding them on the current command line, or to the previous command if there is no preceding reference.

The character sequence ‘^foo^bar’ (where ‘^’ is actually the second character of the histchars parameter) repeats the last command, replacing the string foo with bar. More precisely, the sequence ‘^foo^bar^’ is synonymous with ‘!!:s^foo^bar^’, hence other modifiers (see Modifiers) may follow the final ‘^’. In particular, ‘^foo^bar^:G’ performs a global substitution.

If the shell encounters the character sequence ‘!"’ in the input, the history mechanism is temporarily disabled until the current list (see Shell Grammar) is fully parsed. The ‘!"’ is removed from the input, and any subsequent ‘!’ characters have no special significance.

A less convenient but more comprehensible form of command history support is provided by the fc builtin.

14.1.2 Event Designators

An event designator is a reference to a command-line entry in the history list. In the list below, remember that the initial `!' in each item may be changed to another character by setting the histchars parameter.

!

Start a history expansion, except when followed by a blank, newline, ‘=’ or ‘(’. If followed immediately by a word designator (Word Designators), this forms a history reference with no event designator (Overview).

!!

Refer to the previous command. By itself, this expansion repeats the previous command.

!n

Refer to command-line n.

!-n

Refer to the current command-line minus n.

!str

Refer to the most recent command starting with str.

!?str[?]

Refer to the most recent command containing str. The trailing ‘?’ is necessary if this reference is to be followed by a modifier or followed by any text that is not to be considered part of str.

!#

Refer to the current command line typed in so far. The line is treated as if it were complete up to and including the word before the one with the ‘!#’ reference.

!{...}

Insulate a history reference from adjacent characters (if necessary).

14.1.3 Word Designators

A word designator indicates which word or words of a given command line are to be included in a history reference. A ‘:’ usually separates the event specification from the word designator. It may be omitted only if the word designator begins with a ‘^’, ‘$’, ‘*’, ‘-’ or ‘%’. Word designators include:

0

The first input word (command).

n

The nth argument.

^

The first argument. That is, 1.

$

The last argument.

%

The word matched by (the most recent) ?str search.

x-y

A range of words; x defaults to 0.

*

All the arguments, or a null value if there are none.

x*

Abbreviates ‘x-$’.

x-

Like ‘x*’ but omitting word $.

Note that a ‘%’ word designator works only when used in one of ‘!%’, ‘!:%’ or ‘!?str?:%’, and only when used after a !? expansion (possibly in an earlier command). Anything else results in an error, although the error may not be the most obvious one.

14.1.4 Modifiers

After the optional word designator, you can add a sequence of one or more of the following modifiers, each preceded by a ‘:’. These modifiers also work on the result of filename generation and parameter expansion, except where noted.

a

Turn a file name into an absolute path: prepends the current directory, if necessary; remove ‘.’ path segments; and remove ‘..’ path segments and the segments that immediately precede them.

This transformation is agnostic about what is in the filesystem, i.e. is on the logical, not the physical directory. It takes place in the same manner as when changing directories when neither of the options CHASE_DOTS or CHASE_LINKS is set. For example, ‘/before/here/../after’ is always transformed to ‘/before/after’, regardless of whether ‘/before/here’ exists or what kind of object (dir, file, symlink, etc.) it is.

A

Turn a file name into an absolute path as the ‘a’ modifier does, and then pass the result through the realpath(3) library function to resolve symbolic links.

Note: on systems that do not have a realpath(3) library function, symbolic links are not resolved, so on those systems ‘a’ and ‘A’ are equivalent.

Note: foo:A and realpath(foo) are different on some inputs. For realpath(foo) semantics, see the ‘P‘ modifier.

c

Resolve a command name into an absolute path by searching the command path given by the PATH variable. This does not work for commands containing directory parts. Note also that this does not usually work as a glob qualifier unless a file of the same name is found in the current directory.

e

Remove all but the part of the filename extension following the ‘.’; see the definition of the filename extension in the description of the r modifier below. Note that according to that definition the result will be empty if the string ends with a ‘.’.

h [ digits ]

Remove a trailing pathname component, shortening the path by one directory level: this is the ‘head’ of the pathname. This works like ‘dirname’. If the h is followed immediately (with no spaces or other separator) by any number of decimal digits, and the value of the resulting number is non-zero, that number of leading components is preserved instead of the final component being removed. In an absolute path the leading ‘/’ is the first component, so, for example, if var=/my/path/to/something, then ${var:h3} substitutes /my/path. Consecutive ‘/’s are treated the same as a single ‘/’. In parameter substitution, digits may only be used if the expression is in braces, so for example the short form substitution $var:h2 is treated as ${var:h}2, not as ${var:h2}. No restriction applies to the use of digits in history substitution or globbing qualifiers. If more components are requested than are present, the entire path is substituted (so this does not trigger a ‘failed modifier’ error in history expansion).

l

Convert the words to all lowercase.

p

Print the new command but do not execute it. Only works with history expansion.

P

Turn a file name into an absolute path, like realpath(3). The resulting path will be absolute, have neither ‘.’ nor ‘..’ components, and refer to the same directory entry as the input filename.

Unlike realpath(3), non-existent trailing components are permitted and preserved.

q

Quote the substituted words, escaping further substitutions. Works with history expansion and parameter expansion, though for parameters it is only useful if the resulting text is to be re-evaluated such as by eval.

Q

Remove one level of quotes from the substituted words.

r

Remove a filename extension leaving the root name. Strings with no filename extension are not altered. A filename extension is a ‘.’ followed by any number of characters (including zero) that are neither ‘.’ nor ‘/’ and that continue to the end of the string. For example, the extension of ‘foo.orig.c’ is ‘.c’, and ‘dir.c/foo’ has no extension.

s/l/r[/]

Substitute r for l as described below. The substitution is done only for the first string that matches l. For arrays and for filename generation, this applies to each word of the expanded text. See below for further notes on substitutions.

The forms ‘gs/l/r’ and ‘s/l/r/:G’ perform global substitution, i.e. substitute every occurrence of r for l. Note that the g or :G must appear in exactly the position shown.

See further notes on this form of substitution below.

&

Repeat the previous s substitution. Like s, may be preceded immediately by a g. In parameter expansion the & must appear inside braces, and in filename generation it must be quoted with a backslash.

t [ digits ]

Remove all leading pathname components, leaving the final component (tail). This works like ‘basename’. Any trailing slashes are first removed. Decimal digits are handled as described above for (h), but in this case that number of trailing components is preserved instead of the default 1; 0 is treated the same as 1.

u

Convert the words to all uppercase.

x

Like q, but break into words at whitespace. Does not work with parameter expansion.

The s/l/r/ substitution works as follows. By default the left-hand side of substitutions are not patterns, but character strings. Any character can be used as the delimiter in place of ‘/’. A backslash quotes the delimiter character. The character ‘&’, in the right-hand-side r, is replaced by the text from the left-hand-side l. The ‘&’ can be quoted with a backslash. A null l uses the previous string either from the previous l or from the contextual scan string s from ‘!?s’. You can omit the rightmost delimiter if a newline immediately follows r; the rightmost ‘?’ in a context scan can similarly be omitted. Note the same record of the last l and r is maintained across all forms of expansion.

Note that if a ‘&’ is used within glob qualifiers an extra backslash is needed as a & is a special character in this case.

Also note that the order of expansions affects the interpretation of l and r. When used in a history expansion, which occurs before any other expansions, l and r are treated as literal strings (except as explained for HIST_SUBST_PATTERN below). When used in parameter expansion, the replacement of r into the parameter’s value is done first, and then any additional process, parameter, command, arithmetic, or brace references are applied, which may evaluate those substitutions and expansions more than once if l appears more than once in the starting value. When used in a glob qualifier, any substitutions or expansions are performed once at the time the qualifier is parsed, even before the ‘:s’ expression itself is divided into l and r sides.

If the option HIST_SUBST_PATTERN is set, l is treated as a pattern of the usual form described in Filename Generation. This can be used in all the places where modifiers are available; note, however, that in globbing qualifiers parameter substitution has already taken place, so parameters in the replacement string should be quoted to ensure they are replaced at the correct time. Note also that complicated patterns used in globbing qualifiers may need the extended glob qualifier notation (#q:s/.../.../) in order for the shell to recognize the expression as a glob qualifier. Further, note that bad patterns in the substitution are not subject to the NO_BAD_PATTERN option so will cause an error.

When HIST_SUBST_PATTERN is set, l may start with a # to indicate that the pattern must match at the start of the string to be substituted, and a % may appear at the start or after an # to indicate that the pattern must match at the end of the string to be substituted. The % or # may be quoted with two backslashes.

For example, the following piece of filename generation code with the EXTENDED_GLOB option:

print -r -- *.c(#q:s/#%(#b)s(*).c/'S${match[1]}.C'/)

takes the expansion of *.c and applies the glob qualifiers in the (#q...) expression, which consists of a substitution modifier anchored to the start and end of each word (#%). This turns on backreferences ((#b)), so that the parenthesised subexpression is available in the replacement string as ${match[1]}. The replacement string is quoted so that the parameter is not substituted before the start of filename generation.

The following f, F, w and W modifiers work only with parameter expansion and filename generation. They are listed here to provide a single point of reference for all modifiers.

f

Repeats the immediately (without a colon) following modifier until the resulting word doesn’t change any more.

F:expr:

Like f, but repeats only n times if the expression expr evaluates to n. Any character can be used instead of the ‘:’; if ‘(’, ‘[’, or ‘{’ is used as the opening delimiter, the closing delimiter should be ’)’, ‘]’, or ‘}’, respectively.

w

Makes the immediately following modifier work on each word in the string.

W:sep:

Like w but words are considered to be the parts of the string that are separated by sep. Any character can be used instead of the ‘:’; opening parentheses are handled specially, see above.

14.3.1 Parameter Expansion Flags

If the opening brace is directly followed by an opening parenthesis, the string up to the matching closing parenthesis will be taken as a list of flags. In cases where repeating a flag is meaningful, the repetitions need not be consecutive; for example, ‘(q%q%q)’ means the same thing as the more readable ‘(%%qqq)’. The following flags are supported:

#

Evaluate the resulting words as numeric expressions and output the characters corresponding to the resulting integer. Note that this form is entirely distinct from use of the # without parentheses.

If the MULTIBYTE option is set and the number is greater than 127 (i.e. not an ASCII character) it is treated as a Unicode character.

%

Expand all % escapes in the resulting words in the same way as in prompts (see Prompt Expansion). If this flag is given twice, full prompt expansion is done on the resulting words, depending on the setting of the PROMPT_PERCENT, PROMPT_SUBST and PROMPT_BANG options.

@

In double quotes, array elements are put into separate words. E.g., ‘"${(@)foo}"’ is equivalent to ‘"${foo[@]}"’ and ‘"${(@)foo[1,2]}"’ is the same as ‘"$foo[1]" "$foo[2]"’. This is distinct from field splitting by the f, s or z flags, which still applies within each array element.

A

Convert the substitution into an array expression, even if it otherwise would be scalar. This has lower precedence than subscripting, so one level of nested expansion is required in order that subscripts apply to array elements. Thus ${${(A)name}[1]} yields the full value of name when name is scalar.

This assigns an array parameter with ‘${...=...}’, ‘${...:=...}’ or ‘${...::=...}’. If this flag is repeated (as in ‘AA’), assigns an associative array parameter. Assignment is made before sorting or padding; if field splitting is active, the word part is split before assignment. The name part may be a subscripted range for ordinary arrays; when assigning an associative array, the word part must be converted to an array, for example by using ‘${(AA)=name=...}’ to activate field splitting.

Surrounding context such as additional nesting or use of the value in a scalar assignment may cause the array to be joined back into a single string again.

a

Sort in array index order; when combined with ‘O’ sort in reverse array index order. Note that ‘a’ is therefore equivalent to the default but ‘Oa’ is useful for obtaining an array’s elements in reverse order.

b

Quote with backslashes only characters that are special to pattern matching. This is useful when the contents of the variable are to be tested using GLOB_SUBST, including the ${~...} switch.

Quoting using one of the q family of flags does not work for this purpose since quotes are not stripped from non-pattern characters by GLOB_SUBST. In other words,

pattern=${(q)str}
[[ $str = ${~pattern} ]]

works if $str is ‘a*b’ but not if it is ‘a b’, whereas

pattern=${(b)str}
[[ $str = ${~pattern} ]]

is always true for any possible value of $str.

c

With ${#name}, count the total number of characters in an array, as if the elements were concatenated with spaces between them. This is not a true join of the array, so other expressions used with this flag may have an effect on the elements of the array before it is counted.

C

Capitalize the resulting words. ‘Words’ in this case refers to sequences of alphanumeric characters separated by non-alphanumerics, not to words that result from field splitting.

D

Assume the string or array elements contain directories and attempt to substitute the leading part of these by names. The remainder of the path (the whole of it if the leading part was not substituted) is then quoted so that the whole string can be used as a shell argument. This is the reverse of ‘~’ substitution: see Filename Expansion.

e

Perform single word shell expansions, namely parameter expansion, command substitution and arithmetic expansion, on the result. Such expansions can be nested but too deep recursion may have unpredictable effects.

f

Split the result of the expansion at newlines. This is a shorthand for ‘ps:\n:’.

F

Join the words of arrays together using newline as a separator. This is a shorthand for ‘pj:\n:’.

g:opts:

Process escape sequences like the echo builtin when no options are given (g::). With the o option, octal escapes don’t take a leading zero. With the c option, sequences like ‘^X’ are also processed. With the e option, processes ‘\M-t’ and similar sequences like the print builtin. With both of the o and e options, behaves like the print builtin except that in none of these modes is ‘\c’ interpreted.

i

Sort case-insensitively. May be combined with ‘n’ or ‘O’.

k

If name refers to an associative array, substitute the keys (element names) rather than the values of the elements. Used with subscripts (including ordinary arrays), force indices or keys to be substituted even if the subscript form refers to values. However, this flag may not be combined with subscript ranges. With the KSH_ARRAYS option a subscript ‘[*]’ or ‘[@]’ is needed to operate on the whole array, as usual.

L

Convert all letters in the result to lower case.

n

Sort decimal integers numerically; if the first differing characters of two test strings are not digits, sorting is lexical. Integers with more initial zeroes are sorted before those with fewer or none. Hence the array ‘foo1 foo02 foo2 foo3 foo20 foo23’ is sorted into the order shown. May be combined with ‘i’ or ‘O’.

o

Sort the resulting words in ascending order; if this appears on its own the sorting is lexical and case-sensitive (unless the locale renders it case-insensitive). Sorting in ascending order is the default for other forms of sorting, so this is ignored if combined with ‘a’, ‘i’ or ‘n’.

O

Sort the resulting words in descending order; ‘O’ without ‘a’, ‘i’ or ‘n’ sorts in reverse lexical order. May be combined with ‘a’, ‘i’ or ‘n’ to reverse the order of sorting.

P

This forces the value of the parameter name to be interpreted as a further parameter name, whose value will be used where appropriate. Note that flags set with one of the typeset family of commands (in particular case transformations) are not applied to the value of name used in this fashion.

If used with a nested parameter or command substitution, the result of that will be taken as a parameter name in the same way. For example, if you have ‘foo=bar’ and ‘bar=baz’, the strings ${(P)foo}, ${(P)${foo}}, and ${(P)$(echo bar)} will be expanded to ‘baz’.

Likewise, if the reference is itself nested, the expression with the flag is treated as if it were directly replaced by the parameter name. It is an error if this nested substitution produces an array with more than one word. For example, if ‘name=assoc’ where the parameter assoc is an associative array, then ‘${${(P)name}[elt]}’ refers to the element of the associative subscripted ‘elt’.

q

Quote characters that are special to the shell in the resulting words with backslashes; unprintable or invalid characters are quoted using the $'\NNN' form, with separate quotes for each octet.

If this flag is given twice, the resulting words are quoted in single quotes and if it is given three times, the words are quoted in double quotes; in these forms no special handling of unprintable or invalid characters is attempted. If the flag is given four times, the words are quoted in single quotes preceded by a $. Note that in all three of these forms quoting is done unconditionally, even if this does not change the way the resulting string would be interpreted by the shell.

If a q- is given (only a single q may appear), a minimal form of single quoting is used that only quotes the string if needed to protect special characters. Typically this form gives the most readable output.

If a q+ is given, an extended form of minimal quoting is used that causes unprintable characters to be rendered using $'...'. This quoting is similar to that used by the output of values by the typeset family of commands.

Q

Remove one level of quotes from the resulting words.

t

Use a string describing the type of the parameter where the value of the parameter would usually appear. This string consists of keywords separated by hyphens (‘-’). The first keyword in the string describes the main type, it can be one of ‘scalar’, ‘array’, ‘integer’, ‘float’ or ‘association’. The other keywords describe the type in more detail:

local

for local parameters

left

for left justified parameters

right_blanks

for right justified parameters with leading blanks

right_zeros

for right justified parameters with leading zeros

lower

for parameters whose value is converted to all lower case when it is expanded

upper

for parameters whose value is converted to all upper case when it is expanded

readonly

for readonly parameters

tag

for tagged parameters

export

for exported parameters

unique

for arrays which keep only the first occurrence of duplicated values

hide

for parameters with the ‘hide’ flag

hideval

for parameters with the ‘hideval’ flag

special

for special parameters defined by the shell

u

Expand only the first occurrence of each unique word.

U

Convert all letters in the result to upper case.

v

Used with k, substitute (as two consecutive words) both the key and the value of each associative array element. Used with subscripts, force values to be substituted even if the subscript form refers to indices or keys.

V

Make any special characters in the resulting words visible.

w

With ${#name}, count words in arrays or strings; the s flag may be used to set a word delimiter.

W

Similar to w with the difference that empty words between repeated delimiters are also counted.

X

With this flag, parsing errors occurring with the Q, e and # flags or the pattern matching forms such as ‘${name#pattern}’ are reported. Without the flag, errors are silently ignored.

z

Split the result of the expansion into words using shell parsing to find the words, i.e. taking into account any quoting in the value. Comments are not treated specially but as ordinary strings, similar to interactive shells with the INTERACTIVE_COMMENTS option unset (however, see the Z flag below for related options)

Note that this is done very late, even later than the ‘(s)’ flag. So to access single words in the result use nested expansions as in ‘${${(z)foo}[2]}’. Likewise, to remove the quotes in the resulting words use ‘${(Q)${(z)foo}}’.

0

Split the result of the expansion on null bytes. This is a shorthand for ‘ps:\0:’.

The following flags (except p) are followed by one or more arguments as shown. Any character, or the matching pairs ‘(...)’, ‘{...}’, ‘[...]’, or ‘<...>’, may be used in place of a colon as delimiters, but note that when a flag takes more than one argument, a matched pair of delimiters must surround each argument.

p

Recognize the same escape sequences as the print builtin in string arguments to any of the flags described below that follow this argument.

Alternatively, with this option string arguments may be in the form $var in which case the value of the variable is substituted. Note this form is strict; the string argument does not undergo general parameter expansion.

For example,

sep=:
val=a:b:c
print ${(ps.$sep.)val}

splits the variable on a :.

~

Strings inserted into the expansion by any of the flags below are to be treated as patterns. This applies to the string arguments of flags that follow ~ within the same set of parentheses. Compare with ~ outside parentheses, which forces the entire substituted string to be treated as a pattern. Hence, for example,

[[ "?" = ${(~j.|.)array} ]]

treats ‘|’ as a pattern and succeeds if and only if $array contains the string ‘?’ as an element. The ~ may be repeated to toggle the behaviour; its effect only lasts to the end of the parenthesised group.

j:string:

Join the words of arrays together using string as a separator. Note that this occurs before field splitting by the s:string: flag or the SH_WORD_SPLIT option.

l:expr::string1::string2:

Pad the resulting words on the left. Each word will be truncated if required and placed in a field expr characters wide.

The arguments :string1: and :string2: are optional; neither, the first, or both may be given. Note that the same pairs of delimiters must be used for each of the three arguments. The space to the left will be filled with string1 (concatenated as often as needed) or spaces if string1 is not given. If both string1 and string2 are given, string2 is inserted once directly to the left of each word, truncated if necessary, before string1 is used to produce any remaining padding.

If either of string1 or string2 is present but empty, i.e. there are two delimiters together at that point, the first character of $IFS is used instead.

If the MULTIBYTE option is in effect, the flag m may also be given, in which case widths will be used for the calculation of padding; otherwise individual multibyte characters are treated as occupying one unit of width.

If the MULTIBYTE option is not in effect, each byte in the string is treated as occupying one unit of width.

Control characters are always assumed to be one unit wide; this allows the mechanism to be used for generating repetitions of control characters.

m

Only useful together with one of the flags l or r or with the # length operator when the MULTIBYTE option is in effect. Use the character width reported by the system in calculating how much of the string it occupies or the overall length of the string. Most printable characters have a width of one unit, however certain Asian character sets and certain special effects use wider characters; combining characters have zero width. Non-printable characters are arbitrarily counted as zero width; how they would actually be displayed will vary.

If the m is repeated, the character either counts zero (if it has zero width), else one. For printable character strings this has the effect of counting the number of glyphs (visibly separate characters), except for the case where combining characters themselves have non-zero width (true in certain alphabets).

r:expr::string1::string2:

As l, but pad the words on the right and insert string2 immediately to the right of the string to be padded.

Left and right padding may be used together. In this case the strategy is to apply left padding to the first half width of each of the resulting words, and right padding to the second half. If the string to be padded has odd width the extra padding is applied on the left.

s:string:

Force field splitting at the separator string. Note that a string of two or more characters means that all of them must match in sequence; this differs from the treatment of two or more characters in the IFS parameter. See also the = flag and the SH_WORD_SPLIT option. An empty string may also be given in which case every character will be a separate element.

For historical reasons, the usual behaviour that empty array elements are retained inside double quotes is disabled for arrays generated by splitting; hence the following:

line="one::three"
print -l "${(s.:.)line}"

produces two lines of output for one and three and elides the empty field. To override this behaviour, supply the ‘(@)’ flag as well, i.e. "${(@s.:.)line}".

Z:opts:

As z but takes a combination of option letters between a following pair of delimiter characters. With no options the effect is identical to z. (Z+c+) causes comments to be parsed as a string and retained; any field in the resulting array beginning with an unquoted comment character is a comment. (Z+C+) causes comments to be parsed and removed. The rule for comments is standard: anything between a word starting with the third character of $HISTCHARS, default #, up to the next newline is a comment. (Z+n+) causes unquoted newlines to be treated as ordinary whitespace, else they are treated as if they are shell code delimiters and converted to semicolons. Options are combined within the same set of delimiters, e.g. (Z+Cn+).

_:flags:

The underscore (_) flag is reserved for future use. As of this revision of zsh, there are no valid flags; anything following an underscore, other than an empty pair of delimiters, is treated as an error, and the flag itself has no effect.

The following flags are meaningful with the ${...#...} or ${...%...} forms. The S and I flags may also be used with the ${.../...} forms.

S

With # or ##, search for the match that starts closest to the start of the string (a ‘substring match’). Of all matches at a particular position, # selects the shortest and ## the longest:

% str="aXbXc"
% echo ${(S)str#X*}
abXc
% echo ${(S)str##X*}
a
% 

With % or %%, search for the match that starts closest to the end of the string:

% str="aXbXc"
% echo ${(S)str%X*}
aXbc
% echo ${(S)str%%X*}
aXb
% 

(Note that % and %% don’t search for the match that ends closest to the end of the string, as one might expect.)

With substitution via ${.../...} or ${...//...}, specifies non-greedy matching, i.e. that the shortest instead of the longest match should be replaced:

% str="abab"
% echo ${str/*b/_}
_
% echo ${(S)str/*b/_}
_ab
% 

I:expr:

Search the exprth match (where expr evaluates to a number). This only applies when searching for substrings, either with the S flag, or with ${.../...} (only the exprth match is substituted) or ${...//...} (all matches from the exprth on are substituted). The default is to take the first match.

The exprth match is counted such that there is either one or zero matches from each starting position in the string, although for global substitution matches overlapping previous replacements are ignored. With the ${...%...} and ${...%%...} forms, the starting position for the match moves backwards from the end as the index increases, while with the other forms it moves forward from the start.

Hence with the string

which switch is the right switch for Ipswich?

substitutions of the form ${(SI:N:)string#w*ch} as N increases from 1 will match and remove ‘which’, ‘witch’, ‘witch’ and ‘wich’; the form using ‘##’ will match and remove ‘which switch is the right switch for Ipswich’, ‘witch is the right switch for Ipswich’, ‘witch for Ipswich’ and ‘wich’. The form using ‘%’ will remove the same matches as for ‘#’, but in reverse order, and the form using ‘%%’ will remove the same matches as for ‘##’ in reverse order.

B

Include the index of the beginning of the match in the result.

E

Include the index one character past the end of the match in the result (note this is inconsistent with other uses of parameter index).

M

Include the matched portion in the result.

N

Include the length of the match in the result.

R

Include the unmatched portion in the result (the Rest).

14.3.2 Rules

Here is a summary of the rules for substitution; this assumes that braces are present around the substitution, i.e. ${...}. Some particular examples are given below. Note that the Zsh Development Group accepts no responsibility for any brain damage which may occur during the reading of the following rules.

1. Nested substitution

If multiple nested ${...} forms are present, substitution is performed from the inside outwards. At each level, the substitution takes account of whether the current value is a scalar or an array, whether the whole substitution is in double quotes, and what flags are supplied to the current level of substitution, just as if the nested substitution were the outermost. The flags are not propagated up to enclosing substitutions; the nested substitution will return either a scalar or an array as determined by the flags, possibly adjusted for quoting. All the following steps take place where applicable at all levels of substitution.

Note that, unless the ‘(P)’ flag is present, the flags and any subscripts apply directly to the value of the nested substitution; for example, the expansion ${${foo}} behaves exactly the same as ${foo}. When the ‘(P)’ flag is present in a nested substitution, the other substitution rules are applied to the value before it is interpreted as a name, so ${${(P)foo}} may differ from ${(P)foo}.

At each nested level of substitution, the substituted words undergo all forms of single-word substitution (i.e. not filename generation), including command substitution, arithmetic expansion and filename expansion (i.e. leading ~ and =). Thus, for example, ${${:-=cat}:h} expands to the directory where the cat program resides. (Explanation: the internal substitution has no parameter but a default value =cat, which is expanded by filename expansion to a full path; the outer substitution then applies the modifier :h and takes the directory part of the path.)

2. Internal parameter flags

Any parameter flags set by one of the typeset family of commands, in particular the -L, -R, -Z, -u and -l options for padding and capitalization, are applied directly to the parameter value. Note these flags are options to the command, e.g. ‘typeset -Z’; they are not the same as the flags used within parameter substitutions.

At the outermost level of substitution, the ‘(P)’ flag (rule 4.) ignores these transformations and uses the unmodified value of the parameter as the name to be replaced. This is usually the desired behavior because padding may make the value syntactically illegal as a parameter name, but if capitalization changes are desired, use the ${${(P)foo}} form (rule 25.).

3. Parameter subscripting

If the value is a raw parameter reference with a subscript, such as ${var[3]}, the effect of subscripting is applied directly to the parameter. Subscripts are evaluated left to right; subsequent subscripts apply to the scalar or array value yielded by the previous subscript. Thus if var is an array, ${var[1][2]} is the second character of the first word, but ${var[2,4][2]} is the entire third word (the second word of the range of words two through four of the original array). Any number of subscripts may appear. Flags such as ‘(k)’ and ‘(v)’ which alter the result of subscripting are applied.

4. Parameter name replacement

At the outermost level of nesting only, the ‘(P)’ flag is applied. This treats the value so far as a parameter name (which may include a subscript expression) and replaces that with the corresponding value. This replacement occurs later if the ‘(P)’ flag appears in a nested substitution.

If the value so far names a parameter that has internal flags (rule 2.), those internal flags are applied to the new value after replacement.

5. Double-quoted joining

If the value after this process is an array, and the substitution appears in double quotes, and neither an ‘(@)’ flag nor a ‘#’ length operator is present at the current level, then words of the value are joined with the first character of the parameter $IFS, by default a space, between each word (single word arrays are not modified). If the ‘(j)’ flag is present, that is used for joining instead of $IFS.

6. Nested subscripting

Any remaining subscripts (i.e. of a nested substitution) are evaluated at this point, based on whether the value is an array or a scalar. As with 3., multiple subscripts can appear. Note that ${foo[2,4][2]} is thus equivalent to ${${foo[2,4]}[2]} and also to "${${(@)foo[2,4]}[2]}" (the nested substitution returns an array in both cases), but not to "${${foo[2,4]}[2]}" (the nested substitution returns a scalar because of the quotes).

7. Modifiers

Any modifiers, as specified by a trailing ‘#’, ‘%’, ‘/’ (possibly doubled) or by a set of modifiers of the form ‘:...’ (see Modifiers in History Expansion), are applied to the words of the value at this level.

8. Character evaluation

Any ‘(#)’ flag is applied, evaluating the result so far numerically as a character.

9. Length

Any initial ‘#’ modifier, i.e. in the form ${#var}, is used to evaluate the length of the expression so far.

10. Forced joining

If the ‘(j)’ flag is present, or no ‘(j)’ flag is present but the string is to be split as given by rule 11., and joining did not take place at rule 5., any words in the value are joined together using the given string or the first character of $IFS if none. Note that the ‘(F)’ flag implicitly supplies a string for joining in this manner.

11. Simple word splitting

If one of the ‘(s)’ or ‘(f)’ flags are present, or the ‘=’ specifier was present (e.g. ${=var}), the word is split on occurrences of the specified string, or (for = with neither of the two flags present) any of the characters in $IFS.

If no ‘(s)’, ‘(f)’ or ‘=’ was given, but the word is not quoted and the option SH_WORD_SPLIT is set, the word is split on occurrences of any of the characters in $IFS. Note this step, too, takes place at all levels of a nested substitution.

12. Case modification

Any case modification from one of the flags ‘(L)’, ‘(U)’ or ‘(C)’ is applied.

13. Escape sequence replacement

First any replacements from the ‘(g)’ flag are performed, then any prompt-style formatting from the ‘(%)’ family of flags is applied.

14. Quote application

Any quoting or unquoting using ‘(q)’ and ‘(Q)’ and related flags is applied.

15. Directory naming

Any directory name substitution using ‘(D)’ flag is applied.

16. Visibility enhancement

Any modifications to make characters visible using the ‘(V)’ flag are applied.

17. Lexical word splitting

If the ’(z)’ flag or one of the forms of the ’(Z)’ flag is present, the word is split as if it were a shell command line, so that quotation marks and other metacharacters are used to decide what constitutes a word. Note this form of splitting is entirely distinct from that described by rule 11.: it does not use $IFS, and does not cause forced joining.

18. Uniqueness

If the result is an array and the ‘(u)’ flag was present, duplicate elements are removed from the array.

19. Ordering

If the result is still an array and one of the ‘(o)’ or ‘(O)’ flags was present, the array is reordered.

20. RC_EXPAND_PARAM

At this point the decision is made whether any resulting array elements are to be combined element by element with surrounding text, as given by either the RC_EXPAND_PARAM option or the ‘^’ flag.

21. Re-evaluation

Any ‘(e)’ flag is applied to the value, forcing it to be re-examined for new parameter substitutions, but also for command and arithmetic substitutions.

22. Padding

Any padding of the value by the ‘(l.fill.)’ or ‘(r.fill.)’ flags is applied.

23. Semantic joining

In contexts where expansion semantics requires a single word to result, all words are rejoined with the first character of IFS between. So in ‘${(P)${(f)lines}}’ the value of ${lines} is split at newlines, but then must be joined again before the ‘(P)’ flag can be applied.

If a single word is not required, this rule is skipped.

24. Empty argument removal

If the substitution does not appear in double quotes, any resulting zero-length argument, whether from a scalar or an element of an array, is elided from the list of arguments inserted into the command line.

Strictly speaking, the removal happens later as the same happens with other forms of substitution; the point to note here is simply that it occurs after any of the above parameter operations.

25. Nested parameter name replacement

If the ‘(P)’ flag is present and rule 4. has not applied, the value so far is treated as a parameter name (which may include a subscript expression) and replaced with the corresponding value, with internal flags (rule 2.) applied to the new value.

14.3.3 Examples

The flag f is useful to split a double-quoted substitution line by line. For example, ${(f)"$(<file)"} substitutes the contents of file divided so that each line is an element of the resulting array. Compare this with the effect of $(<file) alone, which divides the file up by words, or the same inside double quotes, which makes the entire content of the file a single string.

The following illustrates the rules for nested parameter expansions. Suppose that $foo contains the array (bar baz):

"${(@)${foo}[1]}"

This produces the result b. First, the inner substitution "${foo}", which has no array (@) flag, produces a single word result "bar baz". The outer substitution "${(@)...[1]}" detects that this is a scalar, so that (despite the ‘(@)’ flag) the subscript picks the first character.

"${${(@)foo}[1]}"

This produces the result ‘bar’. In this case, the inner substitution "${(@)foo}" produces the array ‘(bar baz)’. The outer substitution "${...[1]}" detects that this is an array and picks the first word. This is similar to the simple case "${foo[1]}".

As an example of the rules for word splitting and joining, suppose $foo contains the array ‘(ax1 bx1)’. Then

${(s/x/)foo}

produces the words ‘a’, ‘1 b’ and ‘1’.

${(j/x/s/x/)foo}

produces ‘a’, ‘1’, ‘b’ and ‘1’.

${(s/x/)foo%%1*}

produces ‘a’ and ‘ b’ (note the extra space). As substitution occurs before either joining or splitting, the operation first generates the modified array (ax bx), which is joined to give "ax bx", and then split to give ‘a’, ‘ b’ and ‘’. The final empty string will then be elided, as it is not in double quotes.

14.7.1 Dynamic named directories

If the function zsh_directory_name exists, or the shell variable zsh_directory_name_functions exists and contains an array of function names, then the functions are used to implement dynamic directory naming. The functions are tried in order until one returns status zero, so it is important that functions test whether they can handle the case in question and return an appropriate status.

A ‘~’ followed by a string namstr in unquoted square brackets is treated specially as a dynamic directory name. Note that the first unquoted closing square bracket always terminates namstr. The shell function is passed two arguments: the string n (for name) and namstr. It should either set the array reply to a single element which is the directory corresponding to the name and return status zero (executing an assignment as the last statement is usually sufficient), or it should return status non-zero. In the former case the element of reply is used as the directory; in the latter case the substitution is deemed to have failed. If all functions fail and the option NOMATCH is set, an error results.

The functions defined as above are also used to see if a directory can be turned into a name, for example when printing the directory stack or when expanding %~ in prompts. In this case each function is passed two arguments: the string d (for directory) and the candidate for dynamic naming. The function should either return non-zero status, if the directory cannot be named by the function, or it should set the array reply to consist of two elements: the first is the dynamic name for the directory (as would appear within ‘~[...]’), and the second is the prefix length of the directory to be replaced. For example, if the trial directory is /home/myname/src/zsh and the dynamic name for /home/myname/src (which has 16 characters) is s, then the function sets

reply=(s 16)

The directory name so returned is compared with possible static names for parts of the directory path, as described below; it is used if the prefix length matched (16 in the example) is longer than that matched by any static name.

It is not a requirement that a function implements both n and d calls; for example, it might be appropriate for certain dynamic forms of expansion not to be contracted to names. In that case any call with the first argument d should cause a non-zero status to be returned.

The completion system calls ‘zsh_directory_name c’ followed by equivalent calls to elements of the array zsh_directory_name_functions, if it exists, in order to complete dynamic names for directories. The code for this should be as for any other completion function as described in Completion System.

As a working example, here is a function that expands any dynamic names beginning with the string p: to directories below /home/pws/perforce. In this simple case a static name for the directory would be just as effective.

zsh_directory_name() {
  emulate -L zsh
  setopt extendedglob
  local -a match mbegin mend
  if [[ $1 = d ]]; then
    # turn the directory into a name
    if [[ $2 = (#b)(/home/pws/perforce/)([^/]##)* ]]; then
      typeset -ga reply
      reply=(p:$match[2] $(( ${#match[1]} + ${#match[2]} )) )
    else
      return 1
    fi
  elif [[ $1 = n ]]; then
    # turn the name into a directory
    [[ $2 != (#b)p:(?*) ]] && return 1
    typeset -ga reply
    reply=(/home/pws/perforce/$match[1])
  elif [[ $1 = c ]]; then
    # complete names
    local expl
    local -a dirs
    dirs=(/home/pws/perforce/*(/:t))
    dirs=(p:${^dirs})
    _wanted dynamic-dirs expl 'dynamic directory' compadd -S\] -a dirs
    return
  else
    return 1
  fi
  return 0
}

14.7.2 Static named directories

A ‘~’ followed by anything not already covered consisting of any number of alphanumeric characters or underscore (‘_’), hyphen (‘-’), or dot (‘.’) is looked up as a named directory, and replaced by the value of that named directory if found. Named directories are typically home directories for users on the system. They may also be defined if the text after the ‘~’ is the name of a string shell parameter whose value begins with a ‘/’. Note that trailing slashes will be removed from the path to the directory (though the original parameter is not modified).

It is also possible to define directory names using the -d option to the hash builtin.

When the shell prints a path (e.g. when expanding %~ in prompts or when printing the directory stack), the path is checked to see if it has a named directory as its prefix. If so, then the prefix portion is replaced with a ‘~’ followed by the name of the directory. The shorter of the two ways of referring to the directory is used, i.e. either the directory name or the full path; the name is used if they are the same length. The parameters $PWD and $OLDPWD are never abbreviated in this fashion.

14.7.3 ‘=’ expansion

If a word begins with an unquoted ‘=’ and the EQUALS option is set, the remainder of the word is taken as the name of a command. If a command exists by that name, the word is replaced by the full pathname of the command.

14.7.4 Notes

Filename expansion is performed on the right hand side of a parameter assignment, including those appearing after commands of the typeset family. In this case, the right hand side will be treated as a colon-separated list in the manner of the PATH parameter, so that a ‘~’ or an ‘=’ following a ‘:’ is eligible for expansion. All such behaviour can be disabled by quoting the ‘~’, the ‘=’, or the whole expression (but not simply the colon); the EQUALS option is also respected.

If the option MAGIC_EQUAL_SUBST is set, any unquoted shell argument in the form ‘identifier=expression’ becomes eligible for file expansion as described in the previous paragraph. Quoting the first ‘=’ also inhibits this.

14.8.1 Glob Operators

*

Matches any string, including the null string.

?

Matches any character.

[...]

Matches any of the enclosed characters. Ranges of characters can be specified by separating two characters by a ‘-’. A ‘-’ or ‘]’ may be matched by including it as the first character in the list. There are also several named classes of characters, in the form ‘[:name:]’ with the following meanings. The first set use the macros provided by the operating system to test for the given character combinations, including any modifications due to local language settings, see man page ctype(3):

[:alnum:]

The character is alphanumeric

[:alpha:]

The character is alphabetic

[:ascii:]

The character is 7-bit, i.e. is a single-byte character without the top bit set.

[:blank:]

The character is a blank character

[:cntrl:]

The character is a control character

[:digit:]

The character is a decimal digit

[:graph:]

The character is a printable character other than whitespace

[:lower:]

The character is a lowercase letter

[:print:]

The character is printable

[:punct:]

The character is printable but neither alphanumeric nor whitespace

[:space:]

The character is whitespace

[:upper:]

The character is an uppercase letter

[:xdigit:]

The character is a hexadecimal digit

Another set of named classes is handled internally by the shell and is not sensitive to the locale:

[:IDENT:]

The character is allowed to form part of a shell identifier, such as a parameter name

[:IFS:]

The character is used as an input field separator, i.e. is contained in the IFS parameter

[:IFSSPACE:]

The character is an IFS white space character; see the documentation for IFS in Parameters Used By The Shell.

[:INCOMPLETE:]

Matches a byte that starts an incomplete multibyte character. Note that there may be a sequence of more than one bytes that taken together form the prefix of a multibyte character. To test for a potentially incomplete byte sequence, use the pattern ‘[[:INCOMPLETE:]]*’. This will never match a sequence starting with a valid multibyte character.

[:INVALID:]

Matches a byte that does not start a valid multibyte character. Note this may be a continuation byte of an incomplete multibyte character as any part of a multibyte string consisting of invalid and incomplete multibyte characters is treated as single bytes.

[:WORD:]

The character is treated as part of a word; this test is sensitive to the value of the WORDCHARS parameter

Note that the square brackets are additional to those enclosing the whole set of characters, so to test for a single alphanumeric character you need ‘[[:alnum:]]’. Named character sets can be used alongside other types, e.g. ‘[[:alpha:]0-9]’.

[^...]

[!...]

Like [...], except that it matches any character which is not in the given set.

<[x]-[y]>

Matches any number in the range x to y, inclusive. Either of the numbers may be omitted to make the range open-ended; hence ‘<->’ matches any number. To match individual digits, the [...] form is more efficient.

Be careful when using other wildcards adjacent to patterns of this form; for example, <0-9>* will actually match any number whatsoever at the start of the string, since the ‘<0-9>’ will match the first digit, and the ‘*’ will match any others. This is a trap for the unwary, but is in fact an inevitable consequence of the rule that the longest possible match always succeeds. Expressions such as ‘<0-9>[^[:digit:]]*’ can be used instead.

(...)

Matches the enclosed pattern. This is used for grouping. If the KSH_GLOB option is set, then a ‘@’, ‘*’, ‘+’, ‘?’ or ‘!’ immediately preceding the ‘(’ is treated specially, as detailed below. The option SH_GLOB prevents bare parentheses from being used in this way, though the KSH_GLOB option is still available.

Note that grouping cannot extend over multiple directories: it is an error to have a ‘/’ within a group (this only applies for patterns used in filename generation). There is one exception: a group of the form (pat/)# appearing as a complete path segment can match a sequence of directories. For example, foo/(a*/)#bar matches foo/bar, foo/any/bar, foo/any/anyother/bar, and so on.

x|y

Matches either x or y. This operator has lower precedence than any other. The ‘|’ character must be within parentheses, to avoid interpretation as a pipeline. The alternatives are tried in order from left to right.

^x

(Requires EXTENDED_GLOB to be set.) Matches anything except the pattern x. This has a higher precedence than ‘/’, so ‘^foo/bar’ will search directories in ‘.’ except ‘./foo’ for a file named ‘bar’.

x~y

(Requires EXTENDED_GLOB to be set.) Match anything that matches the pattern x but does not match y. This has lower precedence than any operator except ‘|’, so ‘*/*~foo/bar’ will search for all files in all directories in ‘.’ and then exclude ‘foo/bar’ if there was such a match. Multiple patterns can be excluded by ‘foo~bar~baz’. In the exclusion pattern (y), ‘/’ and ‘.’ are not treated specially the way they usually are in globbing.

x#

(Requires EXTENDED_GLOB to be set.) Matches zero or more occurrences of the pattern x. This operator has high precedence; ‘12#’ is equivalent to ‘1(2#)’, rather than ‘(12)#’. It is an error for an unquoted ‘#’ to follow something which cannot be repeated; this includes an empty string, a pattern already followed by ‘##’, or parentheses when part of a KSH_GLOB pattern (for example, ‘!(foo)#’ is invalid and must be replaced by ‘*(!(foo))’).

x##

(Requires EXTENDED_GLOB to be set.) Matches one or more occurrences of the pattern x. This operator has high precedence; ‘12##’ is equivalent to ‘1(2##)’, rather than ‘(12)##’. No more than two active ‘#’ characters may appear together. (Note the potential clash with glob qualifiers in the form ‘1(2##)’ which should therefore be avoided.)

14.8.2 ksh-like Glob Operators

If the KSH_GLOB option is set, the effects of parentheses can be modified by a preceding ‘@’, ‘*’, ‘+’, ‘?’ or ‘!’. This character need not be unquoted to have special effects, but the ‘(’ must be.

@(...)

Match the pattern in the parentheses. (Like ‘(...)’.)

*(...)

Match any number of occurrences. (Like ‘(...)#’, except that recursive directory searching is not supported.)

+(...)

Match at least one occurrence. (Like ‘(...)##’, except that recursive directory searching is not supported.)

?(...)

Match zero or one occurrence. (Like ‘(|...)’.)

!(...)

Match anything but the expression in parentheses. (Like ‘(^(...))’.)

14.8.3 Precedence

The precedence of the operators given above is (highest) ‘^’, ‘/’, ‘~’, ‘|’ (lowest); the remaining operators are simply treated from left to right as part of a string, with ‘#’ and ‘##’ applying to the shortest possible preceding unit (i.e. a character, ‘?’, ‘[...]’, ‘<...>’, or a parenthesised expression). As mentioned above, a ‘/’ used as a directory separator may not appear inside parentheses, while a ‘|’ must do so; in patterns used in other contexts than filename generation (for example, in case statements and tests within ‘[[...]]’), a ‘/’ is not special; and ‘/’ is also not special after a ‘~’ appearing outside parentheses in a filename pattern.

14.8.4 Globbing Flags

There are various flags which affect any text to their right up to the end of the enclosing group or to the end of the pattern; they require the EXTENDED_GLOB option. All take the form (#X) where X may have one of the following forms:

i

Case insensitive: upper or lower case characters in the pattern match upper or lower case characters.

l

Lower case characters in the pattern match upper or lower case characters; upper case characters in the pattern still only match upper case characters.

I

Case sensitive: locally negates the effect of i or l from that point on.

b

Activate backreferences for parenthesised groups in the pattern; this does not work in filename generation. When a pattern with a set of active parentheses is matched, the strings matched by the groups are stored in the array $match, the indices of the beginning of the matched parentheses in the array $mbegin, and the indices of the end in the array $mend, with the first element of each array corresponding to the first parenthesised group, and so on. These arrays are not otherwise special to the shell. The indices use the same convention as does parameter substitution, so that elements of $mend and $mbegin may be used in subscripts; the KSH_ARRAYS option is respected. Sets of globbing flags are not considered parenthesised groups; only the first nine active parentheses can be referenced.

For example,

foo="a_string_with_a_message"
if [[ $foo = (a|an)_(#b)(*) ]]; then
  print ${foo[$mbegin[1],$mend[1]]}
fi

prints ‘string_with_a_message’. Note that the first set of parentheses is before the (#b) and does not create a backreference.

Backreferences work with all forms of pattern matching other than filename generation, but note that when performing matches on an entire array, such as ${array#pattern}, or a global substitution, such as ${param//pat/repl}, only the data for the last match remains available. In the case of global replacements this may still be useful. See the example for the m flag below.

The numbering of backreferences strictly follows the order of the opening parentheses from left to right in the pattern string, although sets of parentheses may be nested. There are special rules for parentheses followed by ‘#’ or ‘##’. Only the last match of the parenthesis is remembered: for example, in ‘[[ abab = (#b)([ab])# ]]’, only the final ‘b’ is stored in match[1]. Thus extra parentheses may be necessary to match the complete segment: for example, use ‘X((ab|cd)#)Y’ to match a whole string of either ‘ab’ or ‘cd’ between ‘X’ and ‘Y’, using the value of $match[1] rather than $match[2].

If the match fails none of the parameters is altered, so in some cases it may be necessary to initialise them beforehand. If some of the backreferences fail to match — which happens if they are in an alternate branch which fails to match, or if they are followed by # and matched zero times — then the matched string is set to the empty string, and the start and end indices are set to -1.

Pattern matching with backreferences is slightly slower than without.

B

Deactivate backreferences, negating the effect of the b flag from that point on.

cN,M

The flag (#cN,M) can be used anywhere that the # or ## operators can be used except in the expressions ‘(*/)#’ and ‘(*/)##’ in filename generation, where ‘/’ has special meaning; it cannot be combined with other globbing flags and a bad pattern error occurs if it is misplaced. It is equivalent to the form {N,M} in regular expressions. The previous character or group is required to match between N and M times, inclusive. The form (#cN) requires exactly N matches; (#c,M) is equivalent to specifying N as 0; (#cN,) specifies that there is no maximum limit on the number of matches.

m

Set references to the match data for the entire string matched; this is similar to backreferencing and does not work in filename generation. The flag must be in effect at the end of the pattern, i.e. not local to a group. The parameters $MATCH, $MBEGIN and $MEND will be set to the string matched and to the indices of the beginning and end of the string, respectively. This is most useful in parameter substitutions, as otherwise the string matched is obvious.

For example,

arr=(veldt jynx grimps waqf zho buck)
print ${arr//(#m)[aeiou]/${(U)MATCH}}

forces all the matches (i.e. all vowels) into uppercase, printing ‘vEldt jynx grImps wAqf zhO bUck’.

Unlike backreferences, there is no speed penalty for using match references, other than the extra substitutions required for the replacement strings in cases such as the example shown.

M

Deactivate the m flag, hence no references to match data will be created.

anum

Approximate matching: num errors are allowed in the string matched by the pattern. The rules for this are described in the next subsection.

s, e

Unlike the other flags, these have only a local effect, and each must appear on its own: ‘(#s)’ and ‘(#e)’ are the only valid forms. The ‘(#s)’ flag succeeds only at the start of the test string, and the ‘(#e)’ flag succeeds only at the end of the test string; they correspond to ‘^’ and ‘$’ in standard regular expressions. They are useful for matching path segments in patterns other than those in filename generation (where path segments are in any case treated separately). For example, ‘*((#s)|/)test((#e)|/)*’ matches a path segment ‘test’ in any of the following strings: test, test/at/start, at/end/test, in/test/middle.

Another use is in parameter substitution; for example ‘${array/(#s)A*Z(#e)}’ will remove only elements of an array which match the complete pattern ‘A*Z’. There are other ways of performing many operations of this type, however the combination of the substitution operations ‘/’ and ‘//’ with the ‘(#s)’ and ‘(#e)’ flags provides a single simple and memorable method.

Note that assertions of the form ‘(^(#s))’ also work, i.e. match anywhere except at the start of the string, although this actually means ‘anything except a zero-length portion at the start of the string’; you need to use ‘(""~(#s))’ to match a zero-length portion of the string not at the start.

q

A ‘q’ and everything up to the closing parenthesis of the globbing flags are ignored by the pattern matching code. This is intended to support the use of glob qualifiers, see below. The result is that the pattern ‘(#b)(*).c(#q.)’ can be used both for globbing and for matching against a string. In the former case, the ‘(#q.)’ will be treated as a glob qualifier and the ‘(#b)’ will not be useful, while in the latter case the ‘(#b)’ is useful for backreferences and the ‘(#q.)’ will be ignored. Note that colon modifiers in the glob qualifiers are also not applied in ordinary pattern matching.

u

Respect the current locale in determining the presence of multibyte characters in a pattern, provided the shell was compiled with MULTIBYTE_SUPPORT. This overrides the MULTIBYTE option; the default behaviour is taken from the option. Compare U. (Mnemonic: typically multibyte characters are from Unicode in the UTF-8 encoding, although any extension of ASCII supported by the system library may be used.)

U

All characters are considered to be a single byte long. The opposite of u. This overrides the MULTIBYTE option.

For example, the test string fooxx can be matched by the pattern (#i)FOOXX, but not by (#l)FOOXX, (#i)FOO(#I)XX or ((#i)FOOX)X. The string (#ia2)readme specifies case-insensitive matching of readme with up to two errors.

When using the ksh syntax for grouping both KSH_GLOB and EXTENDED_GLOB must be set and the left parenthesis should be preceded by @. Note also that the flags do not affect letters inside [...] groups, in other words (#i)[a-z] still matches only lowercase letters. Finally, note that when examining whole paths case-insensitively every directory must be searched for all files which match, so that a pattern of the form (#i)/foo/bar/... is potentially slow.

14.8.5 Approximate Matching

When matching approximately, the shell keeps a count of the errors found, which cannot exceed the number specified in the (#anum) flags. Four types of error are recognised:

1.

Different characters, as in fooxbar and fooybar.

2.

Transposition of characters, as in banana and abnana.

3.

A character missing in the target string, as with the pattern road and target string rod.

4.

An extra character appearing in the target string, as with stove and strove.

Thus, the pattern (#a3)abcd matches dcba, with the errors occurring by using the first rule twice and the second once, grouping the string as [d][cb][a] and [a][bc][d].

Non-literal parts of the pattern must match exactly, including characters in character ranges: hence (#a1)??? matches strings of length four, by applying rule 4 to an empty part of the pattern, but not strings of length two, since all the ? must match. Other characters which must match exactly are initial dots in filenames (unless the GLOB_DOTS option is set), and all slashes in filenames, so that a/bc is two errors from ab/c (the slash cannot be transposed with another character). Similarly, errors are counted separately for non-contiguous strings in the pattern, so that (ab|cd)ef is two errors from aebf.

When using exclusion via the ~ operator, approximate matching is treated entirely separately for the excluded part and must be activated separately. Thus, (#a1)README~READ_ME matches READ.ME but not READ_ME, as the trailing READ_ME is matched without approximation. However, (#a1)README~(#a1)READ_ME does not match any pattern of the form READ?ME as all such forms are now excluded.

Apart from exclusions, there is only one overall error count; however, the maximum errors allowed may be altered locally, and this can be delimited by grouping. For example, (#a1)cat((#a0)dog)fox allows one error in total, which may not occur in the dog section, and the pattern (#a1)cat(#a0)dog(#a1)fox is equivalent. Note that the point at which an error is first found is the crucial one for establishing whether to use approximation; for example, (#a1)abc(#a0)xyz will not match abcdxyz, because the error occurs at the ‘x’, where approximation is turned off.

Entire path segments may be matched approximately, so that ‘(#a1)/foo/d/is/available/at/the/bar’ allows one error in any path segment. This is much less efficient than without the (#a1), however, since every directory in the path must be scanned for a possible approximate match. It is best to place the (#a1) after any path segments which are known to be correct.

14.8.6 Recursive Globbing

A pathname component of the form ‘(foo/)#’ matches a path consisting of zero or more directories matching the pattern foo.

As a shorthand, ‘**/’ is equivalent to ‘(*/)#’; note that this therefore matches files in the current directory as well as subdirectories. Thus:

ls -ld -- (*/)#bar

or

ls -ld -- **/bar

does a recursive directory search for files named ‘bar’ (potentially including the file ‘bar’ in the current directory). This form does not follow symbolic links; the alternative form ‘***/’ does, but is otherwise identical. Neither of these can be combined with other forms of globbing within the same path segment; in that case, the ‘*’ operators revert to their usual effect.

Even shorter forms are available when the option GLOB_STAR_SHORT is set. In that case if no / immediately follows a ** or *** they are treated as if both a / plus a further * are present. Hence:

setopt GLOBSTARSHORT
ls -ld -- **.c

is equivalent to

ls -ld -- **/*.c

14.8.7 Glob Qualifiers

Patterns used for filename generation may end in a list of qualifiers enclosed in parentheses. The qualifiers specify which filenames that otherwise match the given pattern will be inserted in the argument list.

If the option BARE_GLOB_QUAL is set, then a trailing set of parentheses containing no ‘|’ or ‘(’ characters (or ‘~’ if it is special) is taken as a set of glob qualifiers. A glob subexpression that would normally be taken as glob qualifiers, for example ‘(^x)’, can be forced to be treated as part of the glob pattern by doubling the parentheses, in this case producing ‘((^x))’.

If the option EXTENDED_GLOB is set, a different syntax for glob qualifiers is available, namely ‘(#qx)’ where x is any of the same glob qualifiers used in the other format. The qualifiers must still appear at the end of the pattern. However, with this syntax multiple glob qualifiers may be chained together. They are treated as a logical AND of the individual sets of flags. Also, as the syntax is unambiguous, the expression will be treated as glob qualifiers just as long any parentheses contained within it are balanced; appearance of ‘|’, ‘(’ or ‘~’ does not negate the effect. Note that qualifiers will be recognised in this form even if a bare glob qualifier exists at the end of the pattern, for example ‘*(#q*)(.)’ will recognise executable regular files if both options are set; however, mixed syntax should probably be avoided for the sake of clarity. Note that within conditions using the ‘[[’ form the presence of a parenthesised expression (#q...) at the end of a string indicates that globbing should be performed; the expression may include glob qualifiers, but it is also valid if it is simply (#q). This does not apply to the right hand side of pattern match operators as the syntax already has special significance.

A qualifier may be any one of the following:

/

directories

F

‘full’ (i.e. non-empty) directories. Note that the opposite sense (^F) expands to empty directories and all non-directories. Use (/^F) for empty directories.

.

plain files

@

symbolic links

=

sockets

p

named pipes (FIFOs)

*

executable plain files (0100 or 0010 or 0001)

%

device files (character or block special)

%b

block special files

%c

character special files

r

owner-readable files (0400)

w

owner-writable files (0200)

x

owner-executable files (0100)

A

group-readable files (0040)

I

group-writable files (0020)

E

group-executable files (0010)

R

world-readable files (0004)

W

world-writable files (0002)

X

world-executable files (0001)

s

setuid files (04000)

S

setgid files (02000)

t

files with the sticky bit (01000)

fspec

files with access rights matching spec. This spec may be a octal number optionally preceded by a ‘=’, a ‘+’, or a ‘-’. If none of these characters is given, the behavior is the same as for ‘=’. The octal number describes the mode bits to be expected, if combined with a ‘=’, the value given must match the file-modes exactly, with a ‘+’, at least the bits in the given number must be set in the file-modes, and with a ‘-’, the bits in the number must not be set. Giving a ‘?’ instead of a octal digit anywhere in the number ensures that the corresponding bits in the file-modes are not checked, this is only useful in combination with ‘=’.

If the qualifier ‘f’ is followed by any other character anything up to the next matching character (‘[’, ‘{’, and ‘<’ match ‘]’, ‘}’, and ‘>’ respectively, any other character matches itself) is taken as a list of comma-separated sub-specs. Each sub-spec may be either an octal number as described above or a list of any of the characters ‘u’, ‘g’, ‘o’, and ‘a’, followed by a ‘=’, a ‘+’, or a ‘-’, followed by a list of any of the characters ‘r’, ‘w’, ‘x’, ‘s’, and ‘t’, or an octal digit. The first list of characters specify which access rights are to be checked. If a ‘u’ is given, those for the owner of the file are used, if a ‘g’ is given, those of the group are checked, a ‘o’ means to test those of other users, and the ‘a’ says to test all three groups. The ‘=’, ‘+’, and ‘-’ again says how the modes are to be checked and have the same meaning as described for the first form above. The second list of characters finally says which access rights are to be expected: ‘r’ for read access, ‘w’ for write access, ‘x’ for the right to execute the file (or to search a directory), ‘s’ for the setuid and setgid bits, and ‘t’ for the sticky bit.

Thus, ‘*(f70?)’ gives the files for which the owner has read, write, and execute permission, and for which other group members have no rights, independent of the permissions for other users. The pattern ‘*(f-100)’ gives all files for which the owner does not have execute permission, and ‘*(f:gu+w,o-rx:)’ gives the files for which the owner and the other members of the group have at least write permission, and for which other users don’t have read or execute permission.

estring

+cmd

The string will be executed as shell code. The filename will be included in the list if and only if the code returns a zero status (usually the status of the last command).

In the first form, the first character after the ‘e’ will be used as a separator and anything up to the next matching separator will be taken as the string; ‘[’, ‘{’, and ‘<’ match ‘]’, ‘}’, and ‘>’, respectively, while any other character matches itself. Note that expansions must be quoted in the string to prevent them from being expanded before globbing is done. string is then executed as shell code. The string globqual is appended to the array zsh_eval_context the duration of execution.

During the execution of string the filename currently being tested is available in the parameter REPLY; the parameter may be altered to a string to be inserted into the list instead of the original filename. In addition, the parameter reply may be set to an array or a string, which overrides the value of REPLY. If set to an array, the latter is inserted into the command line word by word.

For example, suppose a directory contains a single file ‘lonely’. Then the expression ‘*(e:'reply=(${REPLY}{1,2})':)’ will cause the words ‘lonely1’ and ‘lonely2’ to be inserted into the command line. Note the quoting of string.

The form +cmd has the same effect, but no delimiters appear around cmd. Instead, cmd is taken as the longest sequence of characters following the + that are alphanumeric or underscore. Typically cmd will be the name of a shell function that contains the appropriate test. For example,

nt() { [[ $REPLY -nt $NTREF ]] }
NTREF=reffile
ls -ld -- *(+nt)

lists all files in the directory that have been modified more recently than reffile.

ddev

files on the device dev

l[-|+]ct

files having a link count less than ct (-), greater than ct (+), or equal to ct

U

files owned by the effective user ID

G

files owned by the effective group ID

uid

files owned by user ID id if that is a number. Otherwise, id specifies a user name: the character after the ‘u’ will be taken as a separator and the string between it and the next matching separator will be taken as a user name. The starting separators ‘[’, ‘{’, and ‘<’ match the final separators ‘]’, ‘}’, and ‘>’, respectively; any other character matches itself. The selected files are those owned by this user. For example, ‘u:foo:’ or ‘u[foo]’ selects files owned by user ‘foo’.

gid

like uid but with group IDs or names

a[Mwhms][-|+]n

files accessed exactly n days ago. Files accessed within the last n days are selected using a negative value for n (-n). Files accessed more than n days ago are selected by a positive n value (+n). Optional unit specifiers ‘M’, ‘w’, ‘h’, ‘m’ or ‘s’ (e.g. ‘ah5’) cause the check to be performed with months (of 30 days), weeks, hours, minutes or seconds instead of days, respectively. An explicit ‘d’ for days is also allowed.

Any fractional part of the difference between the access time and the current part in the appropriate units is ignored in the comparison. For instance, ‘echo *(ah-5)’ would echo files accessed within the last five hours, while ‘echo *(ah+5)’ would echo files accessed at least six hours ago, as times strictly between five and six hours are treated as five hours.

m[Mwhms][-|+]n

like the file access qualifier, except that it uses the file modification time.

c[Mwhms][-|+]n

like the file access qualifier, except that it uses the file inode change time.

L[+|-]n

files less than n bytes (-), more than n bytes (+), or exactly n bytes in length.

If this flag is directly followed by a size specifier ‘k’ (‘K’), ‘m’ (‘M’), or ‘p’ (‘P’) (e.g. ‘Lk-50’) the check is performed with kilobytes, megabytes, or blocks (of 512 bytes) instead. (On some systems additional specifiers are available for gigabytes, ‘g’ or ‘G’, and terabytes, ‘t’ or ‘T’.) If a size specifier is used a file is regarded as "exactly" the size if the file size rounded up to the next unit is equal to the test size. Hence ‘*(Lm1)’ matches files from 1 byte up to 1 Megabyte inclusive. Note also that the set of files "less than" the test size only includes files that would not match the equality test; hence ‘*(Lm-1)’ only matches files of zero size.

^

negates all qualifiers following it

-

toggles between making the qualifiers work on symbolic links (the default) and the files they point to

M

sets the MARK_DIRS option for the current pattern

T

appends a trailing qualifier mark to the filenames, analogous to the LIST_TYPES option, for the current pattern (overrides M)

N

sets the NULL_GLOB option for the current pattern

D

sets the GLOB_DOTS option for the current pattern

n

sets the NUMERIC_GLOB_SORT option for the current pattern

Yn

enables short-circuit mode: the pattern will expand to at most n filenames. If more than n matches exist, only the first n matches in directory traversal order will be considered.

Implies oN when no oc qualifier is used.

oc

specifies how the names of the files should be sorted. If c is n they are sorted by name; if it is L they are sorted depending on the size (length) of the files; if l they are sorted by the number of links; if a, m, or c they are sorted by the time of the last access, modification, or inode change respectively; if d, files in subdirectories appear before those in the current directory at each level of the search — this is best combined with other criteria, for example ‘odon’ to sort on names for files within the same directory; if N, no sorting is performed. Note that a, m, and c compare the age against the current time, hence the first name in the list is the youngest file. Also note that the modifiers ^ and - are used, so ‘*(^-oL)’ gives a list of all files sorted by file size in descending order, following any symbolic links. Unless oN is used, multiple order specifiers may occur to resolve ties.

The default sorting is n (by name) unless the Y glob qualifier is used, in which case it is N (unsorted).

oe and o+ are special cases; they are each followed by shell code, delimited as for the e glob qualifier and the + glob qualifier respectively (see above). The code is executed for each matched file with the parameter REPLY set to the name of the file on entry and globsort appended to zsh_eval_context. The code should modify the parameter REPLY in some fashion. On return, the value of the parameter is used instead of the file name as the string on which to sort. Unlike other sort operators, oe and o+ may be repeated, but note that the maximum number of sort operators of any kind that may appear in any glob expression is 12.

Oc

like ‘o’, but sorts in descending order; i.e. ‘*(^oc)’ is the same as ‘*(Oc)’ and ‘*(^Oc)’ is the same as ‘*(oc)’; ‘Od’ puts files in the current directory before those in subdirectories at each level of the search.

[beg[,end]]

specifies which of the matched filenames should be included in the returned list. The syntax is the same as for array subscripts. beg and the optional end may be mathematical expressions. As in parameter subscripting they may be negative to make them count from the last match backward. E.g.: ‘*(-OL[1,3])’ gives a list of the names of the three largest files.

Pstring

The string will be prepended to each glob match as a separate word. string is delimited in the same way as arguments to the e glob qualifier described above. The qualifier can be repeated; the words are prepended separately so that the resulting command line contains the words in the same order they were given in the list of glob qualifiers.

A typical use for this is to prepend an option before all occurrences of a file name; for example, the pattern ‘*(P:-f:)’ produces the command line arguments ‘-f file1 -f file2 ...’

If the modifier ^ is active, then string will be appended instead of prepended. Prepending and appending is done independently so both can be used on the same glob expression; for example by writing ‘*(P:foo:^P:bar:^P:baz:)’ which produces the command line arguments ‘foo baz file1 bar ...’